Hyundai Ioniq (AE): Body (Interior and Exterior) / Specifications

Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual / Body (Interior and Exterior) / Specifications

Specifications
Items
Specification
Hood
Type
Front openine type, rear hinged, stay rod type
Front Door
Construction
Front hinged, frame door construction
Regulator system
Wire drum type
Locking system
Pin-fork system
Rear Door
Construction
Front hinged, frame door construction
Regulator system
Wire drum type
Locking system
Pin-fork system
Tailgate
Type
Front hinged, gas lifter type
Seat Belts
Front
3 point type with Emergency Locking Retractor (E.L.R)
Rear
3 point type with Emergency Locking Retractor (E.L.R)

Tightening Torque
Items
N.m
Kgf.m
lb-ft
Front and rear doors
Door hinge to body
37.3 - 41.2
3.8 - 4.2
27.5 - 30.4
Door hinge to door
21.6 - 26.5
2.2 - 2.7
15.9 - 19.5
Door checker to door
3.9 - 5.9
0.4 - 0.6
2.9 - 4.3
Door checker to body
16.7 - 21.6
1.7 - 2.2
12.3 - 15.9
Door glass mounting bolt
8.8 - 11.8
0.9 - 1.2
6.5 - 8.7
Outside handle base mounting bolt
Handle
2.0 - 2.9
0.2 - 0.3
1.4 - 2.2
Cover
7.8 - 10.8
0.8 - 1.1
5.8 - 8.0
Door channel mounting bolts
3.9 - 5.9
0.4 - 0.6
2.9 - 4.3
Door latch mounting bolts
7.8 - 14.7 
0.8 - 1.5
5.8 - 10.8
Door module mounting bolts
8.8 - 13.7
0.9 - 1.4
6.5 - 10.1
Door striker mounting bolts
18.6 - 28.4
1.9 - 2.9
13.7 - 21.0
Tailgate
Tailgate hinge to body
21.6 - 26.5
2.2 - 2.7
15.9 - 19.5
Tailgate hinge to tail gate
7.8 - 11.8
0.8 - 1.2
5.8 - 8.7
Tailgate guide bumper screws
6.9 - 8.8
0.7 - 0.9
5.1 - 6.5
Tailgate latch mounting bolts
6.9 - 10.8
0.7 - 1.1
5.1 - 8.0
Tailgate striker mounting bolts
21.6 - 26.5
2.2 - 2.7
15.9 - 19.5
Hood
Hood hinge to body
21.6 - 26.5
2.2 - 2.7
15.9 - 19.5
Hood hinge to hood
21.6 - 26.5
2.2 - 2.7
15.9 - 19.5
Hood latch to body
7.8 - 11.8
0.8 - 1.2
5.8 - 8.7
Seat
Front seat mounting bolts
49.0 - 63.7
5.0 - 6.5
36.2 - 47.0
Rear seat mounting bolts
16.7 - 25.5
1.7 - 2.6
12.3 - 18.8
Seat belt
Height adjuster mounting bolts
39.2 - 53.9
4.0 - 5.5
28.9 - 39.8
Front seat belt upper anchor mounting bolt
39.2 - 53.9
4.0 - 5.5
28.9 - 39.8
Front seat belt pretensioner mounting bolt
39.2 - 53.9
4.0 - 5.5
28.9 - 39.8
Rear seat belt lower anchor mounting bolts
39.2 - 53.9
4.0 - 5.5
28.9 - 39.8
Rear center seat belt retractor mounting bolts
39.2 - 53.9
4.0 - 5.5
28.9 - 39.8
Rear seat belt retractor mounting bolt
39.2 - 53.9
4.0 - 5.5
28.9 - 39.8
Seat belt buckle mounting bolt
39.2 - 53.9
4.0 - 5.5
28.9 - 39.8
Outside rearview mirror
Outside rearview mirror mounting nuts
6.9 - 10.8
0.7 - 1.1
5.1 - 8.0
Fender
Fender panel mounting bolts
7.8 - 11.8
0.8 - 1.2
5.8 - 8.7
Wiper arm
Wiper arm mounting nuts
22.6 - 26.5
2.3 - 2.7
16.6 - 19.5
Sunroof
Sunroof mounting nuts
3.9 - 5.9
0.4 - 0.6
2.9 - 4.3
Sunroof mounting bolts
7.8 - 11.8
0.8 - 1.2
5.8 - 8.7
Rear spoiler
Rear spoiler mounting nuts
5.9 - 6.4
0.6 - 0.65
4.3 - 4.7

    High Voltage Shut-off Procedures    â€¢ Be sure to read and follow the "General Safety Information and Caution" before doing any work related with the high voltage system.

    Special Service Tools Tool (Number and name) Illustration Use 09880-4F000Hog ring clip installerHog ring clip installation

    Other information:

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Auto Defogging Sensor. Description and operation

    DescriptionThe auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives signal from the sensor and restrains moisture and eliminate defog by controlling the intake actuator, A/C, auto defogging actuator, blower moto

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Repair procedures

    Replacement1.Remove the battery (-) terminal.2.Remove the engine room under cover.(Refer to Engine Mechanical System - "Engine Room Under Cover")3.Remove the heater hose (A) and AEWP hose (B).4.Disconnect the lock pin to remove the heater hose pump connector (A).

    Categories

     
    Copyright © 2026 www.hioniqae.com - 0.0122