Hyundai Ioniq (AE): Heated Steering wheel / Specifications
| Specifications |
|
Item
|
Specification
|
| Voltage | 13.5 V |
| Heated pad resistance | 1.8 Ω ± 0.2 Ω |
| NTC resistance | 10.0 kΩ ± 10% (25°C) |
DescriptionFor the convenience of drivers during the winter, exothermic paint is applied to the surface of the steering wheel to generate heat when it is gripped.
System Circuit DiagramBody control ModuleHeated steering switchHeated steering padTermainal functionBody control module Pin Function D3Ignition 2_Heated handle powerD4Ignition 2_Heated handle power_2D5Heated handleC22NTC (-)C9NTC (+)C4Heated handle switchHeated steering wheel pad Housing Pin Function Wire color PadAGroundBLACKBHEATERYELLOWCNTC+GRAYDNTC-BLACKHeated steering wheel switch Pin Function 7Wheel heated12Wheel heated IND.
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Auto Defogging Sensor. Description and operation
DescriptionThe auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives signal from the sensor and restrains moisture and eliminate defog by controlling the intake actuator, A/C, auto defogging actuator, blower moto
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Description and operation
DescriptionRear corner radar is a system that uses two magnetic wave radar sensors attached on the rear panel to measure the distance from the following vehicles and provides the sensing and (visual and auditory) alarm of any vehicle coming into the blind spot.
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Child-Protector Rear Door Locks
- Aux. Battery Saver+ (Plug-in hybrid vehicle)
- Maintenance
- New on site
- Most important about car
