Hyundai Ioniq (AE): Maintenance / Tires and wheels

WARNING

Tire failure may cause loss of vehicle control resulting in an accident. To reduce risk of SERIOUS INJURY or DEATH, take the following precautions:

  • Inspect your tires monthly for proper inflation as well as wear and damage.
  • The recommended cold tire pressure for your vehicle can be found in this manual and on the tire label located on the driver’s side center pillar. Always use a tire pressure gauge to measure tire pressure. Tires with too much or too little pressure wear unevenly causing poor handling.
  • Check the pressure of the spare every time you check the pressure of the other tires on your vehicle.
  • Replace tires that are worn, show uneven wear, or are damaged. Worn tires can cause loss of braking effectiveness, steering control, or traction.
  • ALWAYS replace tires with the same size as each tire that was originally supplied with this vehicle. Using tires and wheels other than the recommended sizes could cause unusual handling characteristics, poor vehicle control, or negatively affect your vehicle's Anti-Lock Brake System (ABS) resulting in a serious accident.

The following items may need to be reset after the battery has been discharged or the battery has been disconnected. See chapter 3 or 4 for: Power Windows Trip Computer Climate Control System Clock Audio System Sunroof Driver Position Memory System

For proper maintenance, safety, and maximum fuel economy, you must always maintain recommended tire inflation pressures and stay within the load limits and weight distribution recommended for your vehicle.

Other information:

Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Blower Unit. Components and components location

Component Location1. Blower unit assembly Components1. Duct Seal2. Intake duct case3. Air intake door assembly4. Intake door5. Seal6. Intake duct case (A)7. Air filter cover (A)8. Intake actuator9. Air filter cover10. Air filter 11. Blower unit pad12.

Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Blower Motor. Repair procedures

Inspection1.Connect the battery voltage and check the blower motor rotation.2.If the blower motor does not operate well, substitute with a known-good blower motor and check for proper operation.3.Replace the blower motor if it is proved that there is a problem with it.

Categories

 
Copyright © 2026 www.hioniqae.com - 0.0143