
Tripmeter (1)
Average Vehicle Speed (2)
Information
Timer (3)
Information
The timer will continue to be counted while the engine is still running (for example, when the vehicle is in traffic or stopped at a stop light.)
Range (1) The range is the estimated distance the vehicle can be driven with the remaining fuel. If the estimated distance is below 1 mi. (1 km), the trip computer will display "----" as range.
Digital speedometer This message shows the speed of the vehicle. Drive Info display At the end of each driving cycle, the Driving Info message is displayed.
Replacement1.Disconnect the negative (-) battery terminal. 2.Remove the heater and blower assembly.(Refer to Heater - "Heater Unit") 3.Remove the evaporator core cover (A) after loosening the mounting screws.4.Pull out the evaporator temperature sensor (A) from the evaporator core.
DescriptionThe temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch. Then the temperature will be regulated by the hot/cold air ratio decided by the position of the temper