Hyundai Ioniq: Hybrid Starter & Generator (HSG) Belt / Checking the Hybrid Starter & Generator (HSG) Belt

Hyundai Ioniq (AE) 2017-2025 Owner's Manual / Maintenance / Hybrid Starter & Generator (HSG) Belt / Checking the Hybrid Starter & Generator (HSG) Belt

Have the hybrid starter & generator (HSG) belt inspected or replaced according to the Maintenance Schedule in this chapter by an authorized HYUNDAI dealer.

CAUTION

When the HSG belt is worn out or damaged, replace the belt.

Otherwise, it may cause engine overheating or battery discharge.

WARNING

Turn the vehicle off while you inspect the engine or hybrid starter & generator(HSG) belt. Otherwise it may result in serious injury.
Keep hands, clothing etc. away from the hybrid starter & generator (HSG) belt.

Hybrid Starter & Generator (HSG) Belt

Brake Fluid

Checking the Brake Fluid Level Check the fluid level in the reservoir periodically. The fluid level should be between MAX and MIN marks on the side of the reservoir...

Other information:

Hyundai Ioniq (AE) 2017-2025 Service Manual: Pre-Charge Resistor. Repair procedures

Removal1.Shut off the high voltage.(Refer to Hybrid Control System - "High Voltage Shut-off Procedures")2.Remove the rear seat cushion.(Refer to Body - "Rear Seat Assembly")3.Remove the rear door scuff trim.(Refer to Body - "Door Scuff Trim")4.Remove the upper frame (A) after loosening the mounting bolts and nuts...

Hyundai Ioniq (AE) 2017-2025 Service Manual: Repair procedures

Service Point Target Auto Calibration (SPTAC)When you need calibration :– Front view camera is removed and mounted– Replace front view camera with a new one – Windshield glass changed– Front view camera coupler of the windshield glass is deformedService Point Target Auto Calibration (SPTAC)Front view camera SPTAC provides the method for the service technician to calibrate the camera by aligning the calibration target (SST: 09890-3V100) with the vehicle on a level ground...