| Components |

| 1. Supplemental Restraint System Control Module (SRSCM) 2. Pressure Side Impact Sensor (P-SIS) 3. Front right Pressure Impact Sensor (FIS) | 4. Front left Pressure Impact Sensor (FIS) 5. Gravity Side Impact Sensor (G-SIS) |
Circuit Diagram
Replacement When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.1.Disconnect the negative (-) battery terminal.2.Recover the refrigerant with a recovery / recycling / charging station.
Removal1.Disconnect the negative (-) battery terminal.2.Remove the rear bumper.(Refer to Body - "Rear Bumper")3.Remove the rear corner radar unit (A) after loosening the mounting nuts. • Take care not to separate the bracket from rear bumper when removing the rear corner radar sensor.