Hyundai Ioniq (AE): High Voltage Battery Cooling System / Cooling Fan. Description and operation

Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual / Hybrid Control System / High Voltage Battery Cooling System / Cooling Fan. Description and operation

Description
The cooling Fan consists of the main connector, the cooling fan relay and the BLDC motor. It is controlled by the BMS ECU PWM signal which varies with the high voltage battery condition (9-Speed).

    Component Location1. Cooling Fan2. Cooling Duct (Inlet)3. Cooing Duct (Outlet)

    Specification Duty (%) Fan Speed (rpm) 10500201,000301,300401,600501,900602,200702,500802,80090 (Max.

    Other information:

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Repair procedures

    Self Diagnosis1.Self-diagnosis process.    â€¢ When operating the self-diagnostics, the below fault (self-diagnostics code) will blink at 0.5 seconds interval on the temperature display settings (driver's side only) and the remaining symbols are OFF .

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Cruise Control Switch. Repair procedures

    Removal1.Disconnect the negative (-) battery terminal.2.Remove the steering wheel assembly.(Refer to Steering System - "Steering Wheel")3.Remove the steering back cover (A).4.Remove the steering remote control connector (A).5.Remove the steering remote control after loosening the screws.

    Categories

     
    Copyright © 2026 www.hioniqae.com - 0.0172