Hyundai Ioniq: Crash Pad / Cowl Cross Bar Assembly. Components and components location

1. Cowl cross bar assembly
|
|
Replacement
•
When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components...
Other information:
AdjustmentGlass Adjustment
•
Check the glass run channel for damage or deterioration, and replace it if necessary.1.Remove the front door trim.(Refer to Front Door - "Front Door Trim")2.Separate the mounting plug hole (A) from the front door module...
Signal WaveformThe three waveforms below are taken from the #1 and #4 injectors. The top waveform is from the high side (feed side) of the #1 and #4 injectors, while the middle waveform is from the low side (ground side) of the #1 injector and the bottom waveform is from the low side of the #4 injector...
Categories

1. Engine oil filler cap
2. Engine oil dipstick
3. Engine coolant cap
4. Engine coolant reservoir
5. Inverter coolant reservoir
read more