Hyundai Ioniq (AE): Heater Hose Pump / Description and operation

Description
In ordinary cars, the mechanical water pump mounted on the engine for heating purposes is activated to circulate the cooling water, but in hybrid cars, AEWP is used to circulate the cooling water when the engine is not operating.
Classification
System
Cooling water used
Mechanical water pump
AEWP
Purpose of use
Note
(role of AEWP)
Engine
Heater
WHRS
While Engine is working
(AEWP activated)

O
O
O
On
Off
Cooling engine
(main function)
-
Heating
-
Exhaust heat recovery and WHRS cooling
-
On
Fast warm -up while cooling or heating is turned on
Increased volume of cooling water circulation
Right after engine is turned off
(EWP working)

X
O
O
Off
On
Heating
In the EV mode, the cooling water is circulated towards the heater.
Cooling the exhaust heat recovery system
During key off, the cooling is supplied for the exhaust heat recovery system

    Replacement1.Remove the battery (-) terminal.2.Remove the engine room under cover.(Refer to Engine Mechanical System - "Engine Room Under Cover")3.Remove the heater hose (A) and AEWP hose (B).

    Other information:

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: PTC Heater. Description and operation

    DescriptionThe PTC (Positive Temperature Coefficient) heater is installed at the exit or the backside of the heater core.The PTC heater is an electric heater using a PTC element as an auxiliary heating device that supplements deficiency of interior heat source in highly effective hybrid engine.

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Auto Defoging Actuator. Repair procedures

    Inspection1.Turn the ignition switch OFF. 2.Disconnect the auto defogging connector. 3.Verify that the auto defogging actuator operates to the open position when connecting 12V to terminal 3 and grounding terminal 4. Verify that the auto defogging actuator operates to the close position when connected in reverse.

    Categories

     
    Copyright В© 2026 www.hioniqae.com - 0.0117