Hyundai Ioniq: What to do in an emergency / In Case of an Emergency While Driving
If the Engine Stalls While Driving
- Reduce your speed gradually, keeping a straight line. Move cautiously off
the road to a safe place.
- Turn on your hazard warning flasher.
- Try to start the hybrid system again. If your vehicle will not start, contact
an authorized HYUNDAI dealer or seek other qualified assistance.
If the Vehicle Stalls at a Crossroad or Crossing
If the vehicle stalls at a crossroad or crossing, if safe to do so, move the
shift lever to the N (Neutral) position and then push the vehicle to a safe location.
If You Have a Flat Tire While Driving
If a tire goes flat while you are driving:
- Take your foot off the accelerator pedal and let the vehicle slow down while
driving straight ahead. Do not apply the brakes immediately or attempt to pull
off the road as this may cause loss of vehicle control resulting in an accident.
When the vehicle has slowed to such a speed that it is safe to do so, brake
carefully and pull off the road. Drive off the road as far as possible and park
on firm, level ground. If you are on a divided highway, do not park in the median
area between the two traffic lanes. • When the vehicle is stopped, press the
hazard warning flasher button, move the shift lever into P (Park), and apply
the parking brake, and place the Engine Start/Stop button in the OFF position.
- Have all passengers get out of the vehicle. Be sure they all get out on
the side of the vehicle that is away from traffic.
- When changing a flat tire, follow the instructions provided later in this
chapter.
The hazard warning flasher serves as a warning to other drivers to exercise extreme
caution when approaching, overtaking, or passing your vehicle.
It should be used whenever emergency repairs are being made or when the vehicle
is stopped near the edge of a roadway...
Hybrid vehicle
Be sure the shift lever is in P (Park). The vehicle starts only when the
shift lever is in P (Park).
This vehicle does not have a regular 12V battery that needs periodic replacement...
Other information:
Removal1.Remove the MDPS assembly.(Refer to Steering System - "MDPS Assembly")2.Remove the MDPS control unit.(Refer to Steering System - "MDPS Control Unit")3.Remove the MDPS motor.(Refer to Steering System - "MDPS Motor")Installation1.Install in the reverse order of removal...
To signal a turn, push down on the lever for a left turn or up for a right turn
in position (A).
If an indicator stays on and does not flash or if it flashes abnormally, one
of the turn signal bulbs may be burned out and will require replacement.
One-touch turn signal function
To activate the One Touch Turn Signal function, push the turn signal lever up
or down to position (B) and then release it...
Categories
Adjusting the side mirrors:
1. Press either the L (driver's side) or R (passenger's side) button (1) to select
the side view mirror you would like to adjust.
read more