| Circuit Diagram |

Specification Item Value Rated voltage (V)400 (DC)Rated current (A)125 (DC)
Removal • Be sure to read and follow the "General Safety Information and Caution" before doing any work related with the high voltage system.
Inspection1.Turn the ignition switch OFF.2.Disconnect the mode control actuator connector.3.Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.Verify that the mode control actuator operates to the vent mode when connected in reverse.
Inspection1.Connect the battery voltage and check the blower motor rotation.2.If the blower motor does not operate well, substitute with a known-good blower motor and check for proper operation.3.Replace the blower motor if it is proved that there is a problem with it.