Hyundai Ioniq: Engine Control System / Purge Control Solenoid Valve (PCSV). Schematic diagrams

Inspection1.Turn the ignition switch OFF.2.Disconnect the PCSV connector.3.Measure resistance between the PCSV terminals 1 and 2.4.Check that the resistance is within the specification...
Other information:
Hub nut tightening sequenceTighten the hub nuts as follows. Tightening torque : 107.9 - 127.5 N.m (11.0 - 13.0 kgf.m, 79.6 - 94.0 lb-ft)
•
When using an impact gun, final tightening torque should be checked using a torque wrench...
Inspection1.Check signal waveform of CKPS and CMPS using a GDS. Specification : Refer to "Waveform"Removal1.Turn ignition switch OFF and disconnect the negative (-) battery cable.2.Disconnect the crankshaft position sensor connector (A).3.Remove the engine room nuder cover...
Categories

1. Door lock/unlock button
2. Driver position memory system
3. Side view mirror control switch
4. Central door lock switch
read more