| Component Location |

| 1. Rear seat cushion assembly | 2. Rear seat back assembly |
Components1. Rear seat back assembly [LH]2. Rear seat back assembly [RH]3. Rear back armrest4. Rear seat cushion assembly
Replacement[Rear seat cushion assembly]1.Loosen the mounting bolts, remove the rear seat cushion assembly (A).2.Disconnect the rear seat cushion extension connector (A).
InspectionOperating Logic Test (Manual only)Inspect the PTC operation by confirmation logic as follows.1.Entering(1)Set the Floor mode and maximum heating position.(2)Turn off the blower switch.(3)Press the intake (recirculation) button 5 times or more.
Inspection1.Turn the ignition switch OFF. 2.Disconnect the auto defogging connector. 3.Verify that the auto defogging actuator operates to the open position when connecting 12V to terminal 3 and grounding terminal 4. Verify that the auto defogging actuator operates to the close position when connected in reverse.