Hyundai Ioniq: Installing a Child Restraint System (CRS) / Securing a child restraint seat with "Tether Anchor" system

Hyundai Ioniq (AE) 2017-2024 Owner's Manual / Safety system of your vehicle / Child restraint system (CRS) / Installing a Child Restraint System (CRS) / Securing a child restraint seat with "Tether Anchor" system

Hyundai Ioniq. Securing a child restraint seat with

First secure the child restraint with the LATCH lower anchors or the seat belt. If the child restraint manufacturer recommends that the top tether strap be attached, attach and tighten the top tether strap to the top tether strap anchor.

Child restraint hook holders are located on the rear of the seatbacks.

WARNING

Take the following precautions when installing the tether strap:

  • Read and follow all installation instructions provided with your child restraint system.
  • NEVER attach more than one child restraint to a single tether anchor. This could cause the anchor or attachment to come loose or break.
  • Do not attach the tether strap to anything other than the correct tether anchor. It may not work properly if attached to something else.
  • Do not use the tether anchors for adult seat belts or harnesses, or for attaching other items or equipment to the vehicle.

Hyundai Ioniq. Securing a child restraint seat with

To install the tether anchor:

1. Route the child restraint tether strap over the child restraint seatback. Route the tether strap under the head restraint and between the head restraint posts, or route the tether strap over the top of the vehicle seatback. Make sure the strap is not twisted.

2. Connect the tether strap hook to the tether anchor, then tighten the tether strap according to the child seat manufacturer's instructions to firmly secure the child restraint to the seat.

3. Check that the child restraint is securely attached to the seat by pushing and pulling the seat forward- and-back and side-to-side.

    Securing a child restraint with the LATCH anchors system

    To install a LATCH-compatible child restraint in either of the rear outboard seating positions: 1. Move the seat belt buckle away from the lower anchors...

    Securing a child restraint with lap/shoulder belt

    When not using the LATCH system, all child restraints must be secured to a vehicle rear seat with the lap part of a lap/shoulder belt. WARNING ALWAYS place a rear-facing child restraint in the rear seat of the vehicle...

    Other information:

    Hyundai Ioniq (AE) 2017-2024 Service Manual: Timing Chain Cover. Repair procedures


    RemovalEngine removal is not required for this procedure.    • Be sure to read and follow the "General Safety Information and Caution" before doing any work related with the high voltage system. Failure to follow the safety instructions may result in serious electrical injuries...

    Hyundai Ioniq (AE) 2017-2024 Service Manual: Description and operation


    Description• Components location : DCT (Dual Clutch Transmission)• Function - The inhibitor switch mounted on the upper of transaxle and connected with shifter lever. - The inhibitor switch has four points of contact and it makes the signals(S1, S2, S3, S4)...

    Categories

    Manual adjustment

    The front seat can be adjusted by using the levers located on the outside of the seat cushion. Before driving, adjust the seat to the proper position so that you can easily control the steering wheel, foot pedals and controls on the instrument panel.

    Forward and rearward adjustment

    Hyundai Ioniq. Manual adjustment

    read more


     
    Copyright © 2024 www.hioniqae.com