| Special Service Tools |
|
Tool (Number and name)
|
Illustration
|
Use
|
| Clutch disc guide & adapter A: 09411-1P000 B: 09411-G2100 |
| Installation of the clutch disc. |
Specifications [Clutch Cover and Disc] Items Specifications Clutch operation methodHydraulic motor typeClutch coverTypeDiaphragm spring strapClutch discTypeSingle dry with diaphragmFaling diameter (Outer × inner)Ø225 × Ø175mm (Ø8.
Replacement When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.1.Disconnect the negative (-) battery terminal.2.Recover the refrigerant with a recovery / recycling / charging station.
Inspection1.Turn the ignition switch OFF.2.Disconnect the intake actuator connector.3.Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4.Verify that the intake actuator operates to the recirculation position when connected in reverse.