| Specification |
|
Item
|
Specification
|
| Power source | 3V |
| Operating temperature | -30°C to +75°C (-22°F to +167°F) |
| RF Modulation | FSK |
| LF Modulation | ASK |
| RF frequency | 433.92 MHz |
| Button number | 3 |
| Function | Door lock |
| Door unlock | |
| Tailgate unlock |
Component Location1. Hood switch2. Burglar horn3. BCM4. Door lock / unlock buzzer5. Front door switch6. Rear door switch
Inspection1.Turn the ignition switch OFF.2.Disconnect the mode control actuator connector.3.Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.Verify that the mode control actuator operates to the vent mode when connected in reverse.
Self Diagnosis1.Self-diagnosis process. • When operating the self-diagnostics, the below fault (self-diagnostics code) will blink at 0.5 seconds interval on the temperature display settings (driver's side only) and the remaining symbols are OFF .