| Specification |
|
Item
|
Specification
|
| Rated Voltage (V) | 63 (DC) |
| Rated Current (A) | 2 (DC) |
DescriptionBattery fuse box is located on the side of the high voltage battery pack. It prevents cells from being damaged by external factors, such as short or overcurrent.
Trouble Symptom Charts– Follow the guide in case of DTC.
Inspection1.Turn the ignition switch ON.2.Connect the GDS.3.Emit intensive light toward the photo sensor using a lamp, and check the output voltage change.4.The voltage will rise with higher intensive light and reduce with lower intensive light.1. Auto light signal2.
Inspection1.Turn the ignition switch OFF.2.Disconnect the mode control actuator connector.3.Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 4.Verify that the mode control actuator operates to the vent mode when connected in reverse.