Hyundai Ioniq (AE): Hybrid Control System / High Voltage Battery System
- Description and operation
- Components and components location
- Specifications
- Inspection
- Battery Pack Assembly. Repair procedures
- Sub Battery Pack Assembly (Sub-BPA). Repair procedures
- Power Relay Assembly (PRA). Description and operation
- Power Relay Assembly (PRA). Repair procedures
- Battery Fuse Box
- Case. Repair procedures
Removal • Be sure to read and follow the "General Safety Information and Caution" before doing any work related with the high voltage system.
DescriptionThe High Voltage Battery System provides the hybrid drive motor, HSG, and electric A/C compressor with electric energy and also reserves the electric energy generated during regeneration braking.
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Heater Unit. Repair procedures
Replacement When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.1.Disconnect the negative (-) battery terminal.2.Recover the refrigerant with a recovery / recycling / charging station.
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Auto Defoging Actuator. Repair procedures
Inspection1.Turn the ignition switch OFF. 2.Disconnect the auto defogging connector. 3.Verify that the auto defogging actuator operates to the open position when connecting 12V to terminal 3 and grounding terminal 4. Verify that the auto defogging actuator operates to the close position when connected in reverse.
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Maintenance
- Theft-alarm System
- If the 12 Volt Battery is Discharged (Hybrid Vehicle)
- New on site
- Most important about car
