Hyundai Ioniq (AE): Low Voltage DC/DC Converter (LDC) / Specifications
| Specification |
|
Item
|
Specification
|
| Input Voltage (V) | 200 - 310 |
| Output Voltage (V) | 12.8 - 14.7 |
| Rated Power (kW) | 1.8 |
| Cooling Method | Water-cooled |
DescriptionThe Low Voltage DC/DC is integrated into the HPCU. It charges the auxiliary battery as a substitute for generator by converting the high voltage (DC 270V) from the high voltage battery into low voltage (DC 12V).
Component Location1. Low Voltage DC/DC Converter (LDC)2. Power Outlet Terminal (DC 12V)3. Ground Terminal
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: emperature Control Actuator. Repair procedures
Inspection1.Turn the ignition switch OFF.2.Disconnect the temperature control actuator connector.3.Verify that the temperature control actuator operates to the cool position when connecting 12V to terminal 3 and grounding terminal 7.Verify that the temperature control actuator operates to the warm position when connected in reverse.
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Repair procedures
Diagnosis with GDS1.REAR CORENER RADAR system defects can be quickly diagnosed with the GDS. GDS operates actuator quickly to monitor, input/output value and self diagnosis.2.Connect the cable of GDS to the data link connector in driver side crash pad lower panel, turn the power on GDS.
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Brake System
- Theft-alarm System
- DCT(Dual Clutch Transmission) System
- New on site
- Most important about car
