Hyundai Ioniq (AE): Hybrid Motor Cooling System / Specifications
| Specifications |
| Coolant | Specified coolant | LLC - 10 |
| Quantity | Approx. 3.2L (0.85 US gal, 3.38 US qt, 2.82 lmp qt.) |
Description• Various devices containing semiconductor are used in HPCU.And heat is generated when the HPCU operates.• These devices are connected to the high voltage directly and cause heat hotter than the electrical devices of an internal combustion engine.
Description• Function : It circulates the coolant for the hybrid system (HPCU, drive motor, and HSG).• Operating Principles: When the coolant temperature exceeds the limit set in the MCU in the hybrid system, the motor control unit (MCU) sends a command to the electric water pump (EWP) through the CAN communication to operate the EWP.
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Auto Defogging Sensor. Repair procedures
Diagnosis With GDS1.The heating, ventilation and air conditioning can be quickly diagnosed failed parts with vehicle diagnostic system (GDS).※ The diagnostic system (GDS) provides the following information.(1) Self diagnosis : Checking the failure code (DTC) and display.
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: emperature Control Actuator. Description and operation
DescriptionThe temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch. Then the temperature will be regulated by the hot/cold air ratio decided by the position of the temper
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Theft-alarm System
- How to Connect Portable Charger (ICCB: In-Cable Control Box)
- Maintenance
- New on site
- Most important about car
