Hyundai Ioniq: Button Engine Start System / Start/Stop Button. Repair procedures
1. | Disconnect the negative(-) battery terminal. |
2. | Remove the crash ped lower panel. (Refer to Body - "Crash Ped Lower Panel") |
3. | Remove the start/stop button (B) after disconnect the connector (A). 
|
1. | Install the start/stop button. |
2. | Install the crash pad lower panel. |
3. | Connect the negative (-) battery terminal. |
Other information:
You can set-up a charging schedule for your vehicle using the AVN or BlueLink
application. Refer to the Multimedia manual or the BlueLink manual for detailed
information about setting scheduled charging.
Scheduled charging can only be done when using a normal charger or the portable
charger (ICCB: In- Cable Control Box)...
Removal1.Loosen the bolt (A) and then disconnect the universal joint assembly from the pinion of the steering gear box. Tightening torque : 32.4 - 37.3 N.m (3.3 - 3.8 kgf.m, 23.9 - 27.5 lb-ft)
•
Do not reuse the bolt...
Categories
The front seat can be adjusted by using the levers located on the outside of
the seat cushion. Before driving, adjust the seat to the proper position so that
you can easily control the steering wheel, foot pedals and controls on the instrument
panel.
Forward and rearward adjustment

read more