Hyundai Ioniq (AE): Body Electrical System / Auto Lighting Control System
- Specifications
- Components and components location
- Schematic diagrams
- Description and operation
- Auto Light Sensor. Repair procedures
Removal1.Disconnect the negative (-) battery terminal.2.Remove the outside rear combination lamp assembly (B) after disconnecting the connector (A).3.Remove the bulb (A) after turning it in the counter clock-wise direction.
Specifications Items Specifications Rated voltage5VLoadMax. 1mA (Relay load)Illuminations (LUX)501.
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Mode Control Actuator. Description and operation
DescriptionThe mode control actuator is located at the heater unit.It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing the mode select switch makes the mode control actuator shift in order of Vent → Bi-Level → Floor → Mix.
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Description and operation
DescriptionBlcok DiagramFunctions of Front View CameraFront View Camera supports the following functions using the information (lane, light source, vehicle and pedestrian) detected by the front view camera and the vehicle's signal information (CAN communication).
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Engine Control/Fuel System
- Repair procedures
- Suspension System
- New on site
- Most important about car
