


When charging the high voltage battery, the charge level can be checked from outside the vehicle.
1. Hold the charging connector handle and pull it while pressing the release button (1). Information To prevent charging cable theft, the charging connector cannot be disconnected from the inlet when the doors are locked.
DescriptionThe A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it high speed or low speed. Engine ECU stops the operation of the compressor when the temperature of refrigerant line is very high or very
Removal1.Disconnect the negative (-) battery terminal.2.Remove the front view camera cover (A).3.Disconnect the front view camera connector (A).4.Remove the front view camera after disengaging the mounting bracket (A).Installation1.Align front view camera with windshield bracket using forward edge point (A).