Hyundai Ioniq (AE): Cooling System / Cooling Fan. Specifications

Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual / Engine Mechanical System / Cooling System / Cooling Fan. Specifications

Specifications
Items
Performance spec
Fan type
PULLER
Fan speed control
PWM
Air flow rate [m³/h (yd³/h)]
2,150 - 8% min.
Fan speed (rpm)
2,000 ± 8%
Current (A)
23.3 + 10% max.

    Components1. Cooling fan2. Fan motor3. Cooling fan shroud4. Cooling fan controller (PWM)5. Cooling fan upper guard

    Schematic Diagrams

    Other information:

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Heater Unit. Components and components location

    Component Location1. Heater unit assemblyCompoents1. Heater core cover2. Heater core & Seal assembly3. Mode actuator [LH]4. Temperature control actuator [LH]5. Shower duct [LH]6. Duct sensor [Floor]7. PTC Heater8. Duct sensor [Vent]9. Heater & Evaporator lower case10.

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Intake Actuator. Repair procedures

    Inspection1.Turn the ignition switch OFF.2.Disconnect the intake actuator connector.3.Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4.Verify that the intake actuator operates to the recirculation position when connected in reverse.

    Categories

     
    Copyright © 2026 www.hioniqae.com - 0.0158