Disassembly • Be sure to read and follow the "General Safety Information and Caution" before doing any work related with the high voltage system.
Engine Coolant Refilling and Bleeding [Drain] • Never remove the reservoir tank cap when the engine is hot.• Serious scalding could be caused by hot fluid under high pressure escaping from the radiator.
Replacement When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.1.Disconnect the negative (-) battery terminal.2.Recover the refrigerant with a recovery / recycling / charging station.
Inspection1.Disconnect the negative (-) battery terminal.2.Remove the crash pad lower panel.(Refer to Body - "Crash Pad Lower Panel")3.Remove the lower crash pad switch assembly (A) after disengaging the mounting clip.4.Remove the rheostat switch connector (A).