Hyundai Ioniq (AE): Hybrid Motor Assembly / Hybrid Starter Generator(HSG). Specifications
| Specifications |
|
Classification
|
Unit
|
Specifications
| |
| Voltage | Vdc | 204 | |
| Driving | Torque | Nm / rpm / sec | 35.3 / 0 - 2160 / 5 |
| Output | kW / rpm / sec | 8.0 / 2160 - 12000 / 5 | |
| Generative | Torque | Nm / rpm / Min | 21.4 / 0 - 3250 / 20 |
| Output | kW / rpm / Min | 7.3 / 3250 - 15000 / 20 | |
| Maximum speed (mechanical limit) | rpm | 18000 | |
| Driving method | - | Belt - driven | |
| RPM (Base / Maximum) | rpm | 2160 / 15000 | |
Component location1. HPCU (Hybrid Power Control Unit)(LDC+MCU+HCU+Reservoir)2. Hybrid drive motor3. Hybrid starter generator (HSG)4. Electrical radiator5.
Removal • When working on the high voltage system, make sure that you are familiar and comply with the "Safety Precautions, Cautions and Warnings".
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Evaporator Temperature Sensor. Description and operation
DescriptionThe evaporator temperature sensor will detect the evaporator core temperature and interrupt compressor relay power in order to prevent evaporator from freezing by excessive cooling. The evaporator temperature sensor has the Negative Temperature Coefficient (NTC).
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Rear Corner Radar Unit. Repair procedures
Removal1.Disconnect the negative (-) battery terminal.2.Remove the rear bumper.(Refer to Body - "Rear Bumper")3.Remove the rear corner radar unit (A) after loosening the mounting nuts. • Take care not to separate the bracket from rear bumper when removing the rear corner radar sensor.
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Washer Fluid
- Transmission Gear Oil. Repair procedures
- General Information
- New on site
- Most important about car
