| Description |
|
Removal1.Disconnect the battery negative cable and wait for at least 3 minutes before beginning work.2.Remove the roof trim.(Refer to Body - "Roof Trim Assembly")3.
Components1. Knee Airbag (KAB)
Inspection • Before measuring the pressure of the refriferant line, check whether the refrigerant amount is charged in accordance with the specified charging amount.(Refer to Heating, Ventilation, Air Conditioning - "Specifications")1.
Diagnosis with GDS1.REAR CORENER RADAR system defects can be quickly diagnosed with the GDS. GDS operates actuator quickly to monitor, input/output value and self diagnosis.2.Connect the cable of GDS to the data link connector in driver side crash pad lower panel, turn the power on GDS.