Removal • Be sure to read and follow the "General Safety Information and Caution" before doing any work related with the high voltage system.
Components1. Power Cable (Main)2. Power Cable (Inverter ↔ HSG & A/C Electric Compressor)
DescriptionThe temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch. Then the temperature will be regulated by the hot/cold air ratio decided by the position of the temper
Removal • Put on gloves to prevent hand injuries. • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.