Hyundai Ioniq (AE): Warning and Indicator Lights / Ready Indicator. EV Mode Indicator. Service Warning Light

Ready Indicator

Hyundai Ioniq. Ready Indicator. EV Mode Indicator. Service Warning Light

This indicator illuminates :

When the vehicle is ready to be driven.

- ON : Normal driving is possible.
- OFF : Normal driving is not possible, or a problem has occurred.
- Blinking : Emergency driving.

When the ready indicator goes OFF or blinks, there is a problem with the system. In this case, have your vehicle inspected by an authorized HYUNDAI dealer.

EV Mode Indicator

Hyundai Ioniq. Ready Indicator. EV Mode Indicator. Service Warning Light

This indicator illuminates when the vehicle is driven by the electric motor.

Service Warning Light

Hyundai Ioniq. Ready Indicator. EV Mode Indicator. Service Warning Light

This warning light illuminates :

  • When you place the Engine Start/ Stop button to the ON position.
    - It illuminates for approximately 3 seconds and then goes off.
  • When there is a problem with the hybrid vehicle control system or hardware.

When the warning light illuminates while driving, or does not go OFF after starting the vehicle, have your vehicle inspected by an authorized HYUNDAI dealer.

    Information Make sure that all warning lights are OFF after starting the engine. If any light is still ON, this indicates a situation that needs attention.

    Charging Cable Connection Indicator (Plug-in hybrid) This indicator illuminates in red when the charging cable is connected. Air Bag Warning Light This warning light illuminates: When you place the Engine Start/ Stop button to the ON position.

    Other information:

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Photo Sensor. Description and operation

    Description The photo sensor is located at the center of the defrost nozzles.The photo sensor contains a photovoltaic (sensitive to sunlight) diode. The solar radiation received by its light receiving portion, generates an electromotive force in proportion to the amount of radiation received which is transferred to the automatic temperature control

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Intake Actuator. Repair procedures

    Inspection1.Turn the ignition switch OFF.2.Disconnect the intake actuator connector.3.Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4.Verify that the intake actuator operates to the recirculation position when connected in reverse.

    Categories

     
    Copyright © 2025 www.hioniqae.com - 0.0125