Hyundai Ioniq (AE): Instrument Cluster / Warning and Indicator Lights
Information
Make sure that all warning lights are OFF after starting the engine. If any light is still ON, this indicates a situation that needs attention.
- Ready Indicator. EV Mode Indicator. Service Warning Light
- Charging Cable Connection Indicator (Plug-in hybrid). Air Bag Warning Light. Seat Belt Warning Light
- Parking Brake & Brake Fluid Warning Light
- Regenerative Brake, Anti-lock Brake System (ABS) Warning Lights
- Electronic Brake Force Distribution (EBD) System Warning Light
- Electric Power Steering (EPS) Warning Light, Malfunction Indicator Lamp (MIL)
- Charging System Warning Light, Engine Oil Pressure Warning Light
- Low Fuel Level Warning Light, Engine Coolant Temperature Warning Light, Master Warning Light
- Low Tire Pressure Warning Light
- Electronic Stability Control (ESC) Indicator Light
- Immobilizer Indicator Light
- Turn Signal, High Beam, Light ON Indicator Lights
- High Beam Assist (HBA) indicator light, Exterior Light Warning Light, LED Headlight Warning Light
- Other Indicator Lights
This indicator displays which shift lever position is selected. Shift indicator pop-up (if equipped) The pop-up indicates the current gear position displayed in the cluster for about 2 seconds when shifting into other positions (P/R/N/D).
Ready Indicator This indicator illuminates : When the vehicle is ready to be driven. - ON : Normal driving is possible. - OFF : Normal driving is not possible, or a problem has occurred.
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Heater Core. Repair procedures
Replacement1.Disconnect the negative (-) battery terminal. 2.Remove the heater and blower assembly.(Refer to Heater - "Heater Unit") 3.Loosen the mounting screws and remove the driver's temperature control actuator (A).4.Remove the heater core cover (A) after loosening the mounting screws.
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: emperature Control Actuator. Repair procedures
Inspection1.Turn the ignition switch OFF.2.Disconnect the temperature control actuator connector.3.Verify that the temperature control actuator operates to the cool position when connecting 12V to terminal 3 and grounding terminal 7.Verify that the temperature control actuator operates to the warm position when connected in reverse.
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- General Information
- Hybrid Control System
- Hybrid Vehicle Engine Compartment
- New on site
- Most important about car
