Hyundai Ioniq (AE): Warning and Indicator Lights / Electronic Brake Force Distribution (EBD) System Warning Light

Hyundai Ioniq. Electronic Brake Force Distribution (EBD) System Warning LightHyundai Ioniq. Electronic Brake Force Distribution (EBD) System Warning Light

These two warning lights illuminate at the same time while driving:

• When the ABS and regular brake system may not work normally. In this case, have the vehicle inspected by an authorized HYUNDAI dealer.

WARNING

Electronic Brake Force Distribution (EBD) System Warning Light

When both ABS and Parking Brake & Brake Fluid Warning Lights are on, the brake system will not work normally and you may experience an unexpected and dangerous situation during sudden braking.

In this case, avoid high speed driving and abrupt braking.

Have the vehicle inspected by an authorized HYUNDAI dealer as soon as possible.

Information - Electronic Brake Force Distribution (EBD) System Warning Light

When the ABS Warning Light is on or both ABS and Parking Brake & Brake Fluid Warning Lights are on, the speedometer, odometer, or tripmeter may not work. Also, the EPS Warning Light may illuminate and the steering effort may increase or decrease.

In this case, have the vehicle inspected by an authorized HYUNDAI dealer as soon as possible.

    Regenerative Brake Warning Light This warning light illuminates : When you place the Engine Start/ Stop button to the ON position. - It illuminates for approximately 3 seconds.

    Electric Power Steering (EPS) Warning Light This warning light illuminates: When you place the Engine Start/ Stop button to the ON position. - It illuminates for approximately 3 seconds and then goes off.

    Other information:

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: emperature Control Actuator. Specifications

    S

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Front Radar Unit. Repair procedures

    Removal1.Remove the front bumper.(Refer to Body - "Front Bumper")2.Disconnect the smart cruise control unit connector (A).3.Remove the smart cruise control nuit assembly (B) from thevehicle after loosening mounting bolts.Installation1.Install in the reverse order of removal.

    Categories

     
    Copyright © 2025 www.hioniqae.com - 0.0114