Replacement1.Remove the front driveshaft. (Refer to Driveshaft Assembly - "Front Driveshaft")2.Remove the TJ joint assembly. (Refer to Driveshaft Assembly - "TJ Joint")3.
Components1. Rear axle2. Dust cover3. Rear hub bearing4. Rear brake disc
Inspection1.Turn the ignition switch ON.2.Connect the GDS.3.Emit intensive light toward the photo sensor using a lamp, and check the output voltage change.4.The voltage will rise with higher intensive light and reduce with lower intensive light.1. Auto light signal2.
C