Hyundai Ioniq (AE): Battery Fuse Box / Repair procedures

Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual / Hybrid Control System / High Voltage Battery System / Battery Fuse Box / Repair procedures

Removal
   
•
Be sure to read and follow the "General Safety Information and Caution" before doing any work related with the high voltage system. Failure to follow the safety instructions may result in serious electrical injuries.
1.
Shut off the high voltage.
(Refer to Hybrid Control System - "High Voltage Shut-off Procedures")
2.
Remove the battery pack assembly.
(Refer to High Voltage Battery System - "Battery Pack Assembly")
3.
Remove the battery fuse box (B) after releasing the fixing hooks (A).

Installation
   
•
Be sure to read and follow the "General Safety Information and Caution" before doing any work related with the high voltage system. Failure to follow the safety instructions may result in serious electrical injuries.
1.
Install the battery fuse box in the reverse order of removal.
2.
Install the battery pack assembly in the reverse order of removal.
(Refer to High Voltage Battery System - "Battery Pack Assembly")

    Circuit Diagram

    Removal[High Voltage Battery Front Cover]1.Shut off the high voltage.(Refer to Hybrid Control System - "High Voltage Shut-off Procedures")2.Remove the rear seat cushion.

    Other information:

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Duct Sensor. Components and components location

    C

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Heater Unit. Repair procedures

    Replacement    When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.1.Disconnect the negative (-) battery terminal.2.Recover the refrigerant with a recovery / recycling / charging station.

    Categories

     
    Copyright © 2026 www.hioniqae.com - 0.0237