Hyundai Ioniq (AE): Restraint / Special service tools

Special Service Tools
Tool (Number and Name)
Illustration
Use
Deployment tool
0957A-34100A

Airbag deployment tool.
Use with (0957A-AL140, 0957A-AL160)
Dummy
0957A-38200

Simulator to check the resistanceof each wiring harness.
Use with (0957A-AL170, 0957A-AL190)
Airbag deployment & dummy adapter kit
0957A-AL100

Use with airbag deployment and airbag inspection
Deployment adapter
0957A-AL140

Use with deployment tool. (0957A-34100A)
(DAB, PAB, CAB, BPT, EFD)
Deployment adapter
0957A-AL160

Use with deployment tool. (0957A-34100A)
(SAB, KAB)
Dummy adapter
0957A-AL170

Use with dummy (0957A-38200)
(DAB, PAB, CAB, BPT, EFD)
Dummy adapter
0957A-AL190

Use with dummy (0957A-38200)
(SAB, KAB)

DAB : Driver Airbag
PAB : Passenger Airbag
SAB : Side Airbag
CAB : Curtain Airbag
KAB : Knee Air Bag
BPT : Seat Belt Pretensioner
EFD : Emergency fastening Device

    Specification Item Resistance (Ω) Driver Airbag (DAB)2.0 - 6.0Passenger Airbag (PAB)1.6 - 6.0Knee Airbag (KAB)1.

    PrecautionsGeneral PrecautionsPlease read the following precautions carefully before performing the airbag system service. Observe the instructions described in this manual, or the airbags could accidentally deploy and cause damage or injuries.

    Other information:

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Ambient Temperature Sensor. Description and operation

    DescriptionThe ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.The sensor output will be used for discharge temperature control, temperature regulation door contrl, blower m

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Auto Defoging Actuator. Repair procedures

    Inspection1.Turn the ignition switch OFF. 2.Disconnect the auto defogging connector. 3.Verify that the auto defogging actuator operates to the open position when connecting 12V to terminal 3 and grounding terminal 4. Verify that the auto defogging actuator operates to the close position when connected in reverse.

    Categories

     
    Copyright © 2026 www.hioniqae.com - 0.0238