| Specification |
|
Item
|
Type
|
Bulb Watt (W)
| |||
| Front | Head lamp | Halogen | Low beam / High beam | H7LL / 9005L+ | 60 / 55 |
| Turn signal lamp / Position lamp | PY21W/W5W | 21 / 5 | |||
| LED | Low beam / High beam | LED | LED | ||
| Turn signal lamp | PY 21W | 21 | |||
| Position lamp | LED | LED | |||
| Daytime Running Light (DRL) | LED | LED | |||
| Door mirror turn signal lamp | LED | LED | |||
| Rear | Rear combination | Bulb Type | Tail lamp | 5W | 5 |
| Turn signal lamp | P21/5W | 21 / 5 | |||
| Back up lamp | W 16W | 16 | |||
| Turn signal lamp | PY 21W | 21 | |||
| LED Type | Stop / Tail lamp | LED | LED | ||
| Back up lamp | W 16W | 16 | |||
| Turn signal lamp | PY21W | 21 | |||
| High mouted stop lamp | LED | LED | |||
| License plate lamp | W5W | 5 | |||
| Interior | Map lamp | W10 | 10 | ||
| Room lamp | FESTOON | 8 | |||
| Luggage lamp | FESTOON | 5 | |||
| Vanity lamp | FESTOON | 5 | |||
Component Location1. Head lamp (Low)2. Head lamp (High)3. Position lamp4. Turn signal lamp5. Daytime Running Light (DRL)6.Turn signal lamp (Door mirror)7.
Replacement1.Disconnect the negative (-) battery terminal. 2.Remove the heater and blower assembly.(Refer to Heater - "Heater Unit") 3.Loosen the mounting screws and remove the driver's temperature control actuator (A).4.Remove the heater core cover (A) after loosening the mounting screws.
Removal1.Remove the front bumper.(Refer to Body - "Front Bumper")2.Disconnect the smart cruise control unit connector (A).3.Remove the smart cruise control nuit assembly (B) from thevehicle after loosening mounting bolts.Installation1.Install in the reverse order of removal.