Hyundai Ioniq (AE): Body Electrical System / Lighting System
- Specifications
- Components and components location
- Head Lamps. Components and components location
- Head Lamps. Repair procedures
- Room Lamp. Repair procedures
- Overhead Console Lamp. Repair procedures
- Hazard Lamp Switch. Repair procedures
- Rheostat. Components and components location
- Rheostat. Repair procedures
- DRL(Daytime Running Lights). Repair procedures
- License Lamps. Repair procedures
- High Mounted Stop Lamp. Repair procedures
- Rear Combination Lamp. Repair procedures
Inspection 1.Disconnect the negative (-) battery terminal.2.Remove the roof trim.(Refer to Body - "Roof Trim")3.Disconnect the sunroof motor (A) connector.
Specification Item Type Bulb Watt (W) FrontHead lampHalogenLow beam / High beamH7LL / 9005L+60 / 55Turn signal lamp / Position lampPY21W/W5W21 / 5LEDLow beam / High beamLEDLEDTurn signal lampPY 21W21Position lampLEDLEDDaytime Running Light (DRL) LEDLEDDoor mirror turn signal lamp LEDLEDRearRear combinationBulb TypeTail lamp5W 5Turn signal lampP21/5W21 / 5Back up lampW 16W16Turn signal lampPY 21W21LED TypeStop / Tail lampLEDLEDBack up lampW 16W16Turn signal lampPY21W21High mouted stop lampLEDLEDLicense plate lamp W5W5InteriorMap lamp W1010Room lamp FESTOON8Luggage lamp FESTOON5Vanity lamp FESTOON5
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Duct Sensor. Components and components location
C
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Auto Defoging Actuator. Repair procedures
Inspection1.Turn the ignition switch OFF. 2.Disconnect the auto defogging connector. 3.Verify that the auto defogging actuator operates to the open position when connecting 12V to terminal 3 and grounding terminal 4. Verify that the auto defogging actuator operates to the close position when connected in reverse.
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Jump starting procedure
- Jump Starting
- Troubleshooting
- New on site
- Most important about car
