Hyundai Ioniq (AE): Parking Distance Warning (PDW) / Specifications
| Specification |
|
Item
|
Specification
| |
| Ultrasonic sensor | Voltage rating | DC 12V |
| Detecting range | 30 - 120cm | |
| Operation voltage | DC 9 - 16V | |
| Operation current | MAX 350mA | |
| Operation temperature | -30°C to +75°C (22°F to +167°F) | |
| Operation frequency | 48 ± 5KHz | |
| Number of sensors | 8EA | |
Component Location1. BCM (Body Control Module)2. Ultrasonic sensor • Parking Distance Warning control unit function is built in BCM (Body Control Module).
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Mode Control Actuator. Description and operation
DescriptionThe mode control actuator is located at the heater unit.It adjusts the position of the mode door by operating the mode control actuator based on the signal of the A/C control unit. Pressing the mode select switch makes the mode control actuator shift in order of Vent → Bi-Level → Floor → Mix.
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Parking Distance Warning (PDW) Sensor. Repair procedures
Removal1.Disconnect the negative (-) battery terminal.2.Remove the front / rear bumper cover.(Refer to Body - "Front Bumper Cover")(Refer to Body - "Rear Bumper Cover")3.Disconnect the connector (A) from the parking assist sensor.4.Remove the sensor (A) by pulling out both ends of the sensor holder.
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Transmission Gear Oil. Repair procedures
- Brake System
- Brake Fluid
- New on site
- Most important about car
