Hyundai Ioniq (AE): Inhibitor Switch / Specifications
| Specifications |
|
Item
|
Specifications
|
| Output type | Combination of output signals |
| Power supply (V) | 12 |
| Signal Code Table |
| P | P-R | R | R-N | N | N-D | D | |
| S1 | (-) | (-) | 0 | 0 | 0 | 0 | 0 |
| S2 | 0 | (-) | (-) | (-) | 0 | 0 | 0 |
| S3 | 0 | 0 | 0 | (-) | (-) | (-) | 0 |
| S4 | 0 | 0 | 0 | 0 | 0 | (-) | (-) |
Description• Components location : DCT (Dual Clutch Transmission)• Function - The inhibitor switch mounted on the upper of transaxle and connected with shifter lever.
Circuit Diagram
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Blower Unit. Components and components location
Component Location1. Blower unit assembly Components1. Duct Seal2. Intake duct case3. Air intake door assembly4. Intake door5. Seal6. Intake duct case (A)7. Air filter cover (A)8. Intake actuator9. Air filter cover10. Air filter 11. Blower unit pad12.
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Parking Distance Warning (PDW) Sensor. Repair procedures
Removal1.Disconnect the negative (-) battery terminal.2.Remove the front / rear bumper cover.(Refer to Body - "Front Bumper Cover")(Refer to Body - "Rear Bumper Cover")3.Disconnect the connector (A) from the parking assist sensor.4.Remove the sensor (A) by pulling out both ends of the sensor holder.
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Washer Fluid
- Brake System
- Body (Interior and Exterior)
- New on site
- Most important about car
