Hyundai Ioniq (AE): DCT(Dual Clutch Transmission) System / Dual Clutch Transmission Control System
- Description and operation
- Components and components location
- DCT Control Module (TCM). Description and operation
- DCT Control Module (TCM). Schematic diagrams
- DCT Control Module (TCM). Repair procedures
- Clutch Actuator Assembly
- Gear Actuator Assembly
- Input shaft speed sensor 1
- Input shaft speed sensor 2
- Inhibitor Switch
- Shift Lever. Components and components location
- Shift Lever. Repair procedures
- Shift Cable. Components and components location
- Shift Cable. Repair procedures
Inspection • In principle, the transmission oil is maintenance-free, and no exchange is required. 1.Park the vehicle on flat ground and turn off the engine.
DescriptionThe Dual Clutch Transmission (DCT) control system measures required data to identify the state of the control target and computes the appropriate compensation value if adjustment is necessary.
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: PTC Heater. Repair procedures
InspectionOperating Logic Test (Manual only)Inspect the PTC operation by confirmation logic as follows.1.Entering(1)Set the Floor mode and maximum heating position.(2)Turn off the blower switch.(3)Press the intake (recirculation) button 5 times or more.
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Evaporator Core. Repair procedures
Replacement1.Disconnect the negative (-) battery terminal. 2.Remove the heater and blower assembly.(Refer to Heater - "Heater Unit") 3.Remove the evaporator core cover (A) after loosening the mounting screws.4.Pull out the evaporator temperature sensor (A) from the evaporator core.
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Jump Starting
- Repair procedures
- Normal Maintenance Schedule
- New on site
- Most important about car
