Hyundai Ioniq (AE): Dual Clutch Transmission Control System / Gear Actuator Assembly
- Components and components location
- Specifications
- Description and operation
- Schematic diagrams
- Repair procedures
Removal1.Turn ignition switch OFF and disconnect the battery negative (-) terminal.2.Remove the engine room under cover.(Refer to Engine Mechanical System - "Engine Room Under Cover")3.
Components1. Gear actuator assembly2. Shift motor (Even)3. Shift motor (Odd)4. Select solenoid (Even)5. Select solenoid (Odd)
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Evaporator Temperature Sensor. Description and operation
DescriptionThe evaporator temperature sensor will detect the evaporator core temperature and interrupt compressor relay power in order to prevent evaporator from freezing by excessive cooling. The evaporator temperature sensor has the Negative Temperature Coefficient (NTC).
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Intake Actuator. Repair procedures
Inspection1.Turn the ignition switch OFF.2.Disconnect the intake actuator connector.3.Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4.Verify that the intake actuator operates to the recirculation position when connected in reverse.
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- General Information
- Description and operation
- Hybrid Vehicle Engine Compartment
- New on site
- Most important about car
