| Specification |
|
Item
|
Condition
|
Specification
|
| Resistance (line to line) | Shift motor 1/2 | 126.4 mΩ ± 10 % |
| Select solenoid 1/2 | 0.7 mΩ ± 10 % | |
| Max. current | Shift motor 1/2 | 45 A |
| Select solenoid 1/2 | 20 A | |
| Select solenoid sensor output | Push | 4.0 ± 0.15 V |
| Pull | 1.0 ± 0.15 V | |
| Operation condition (°C)°F | -40 to 257 °F (- 40 to 125 °C ) | |
| Rated voltage | 13 V | |
| Sensor supply voltage | 8.75 V | |
Components1. Gear actuator assembly2. Shift motor (Even)3. Shift motor (Odd)4. Select solenoid (Even)5. Select solenoid (Odd)
Description• Components location : DCT (Dual Clutch Transmission)• Function The gear actuator is comprised of the shift motor and select solenoid.
Service Point Target Auto Calibration (SPTAC)When you need calibration :– Front view camera is removed and mounted– Replace front view camera with a new one – Windshield glass changed– Front view camera coupler of the windshield glass is deformedService Point T
Removal1.Disconnect the negative (-) battery terminal.2.Remove the steering wheel assembly.(Refer to Steering System - "Steering Wheel")3.Remove the steering back cover (A).4.Remove the steering remote control connector (A).5.Remove the steering remote control after loosening the screws.