Hyundai Ioniq: High Voltage Battery Control System / Battery Temperature Sensor. Description and operation
Battery Temperature Sensor is installed inside the high voltage battery pack assembly. It measures the temperature of the battery module 1, 4 and air inlet. In addition, it integrates the voltage sensing wiring for each module.
![](images/battery_temperature_sensor_description_and_operation-508/413/saehc6h019l_n.gif)
Removal
•
Be sure to read and follow the "General Safety Information and Caution" before doing any work related with the high voltage system...
Specification[Air Inlet]
Temperature
Resistance (kΩ)
°C
°F
-50-58314...
Other information:
Replacement
•
When removing the fender, wrap protective tape around a screwdriver or remover not to damage components•
Put on gloves to prevent hand injuries
•
When removing the clips, use a clip remover...
To set Vehicle-to-Vehicle Distance
When the Smart Cruise Control System is ON, you can set and maintain the distance
from the vehicle ahead of you without pressing the accelerator or brake pedal.
Each time the button is pressed, the vehicle to vehicle distance changes as follows:
For example, if you drive at 56 mph (90 km/h), the distance is maintained as
follows:
Distance 4 - approximately 172 feet
Distance 3 - approximately 130 feet
Distance 2 - approximately 106 feet
Distance 1 - approximately 82 feet
Information
The distance is set to the last set distance when the system is used for the
first time after the vehicle is in the ready ()
mode...
Categories
![Hyundai Ioniq. Hybrid Vehicle Engine Compartment](images/books/1/hyundai_ioniq_hybrid_vehicle_engine_compartment_5.png)
1. Engine oil filler cap
2. Engine oil dipstick
3. Engine coolant cap
4. Engine coolant reservoir
5. Inverter coolant reservoir
read more