Hyundai Ioniq: Charging the Plug-in Hybrid Vehicle / Charging Status
When charging the high voltage battery, the charge level can be checked from
outside the vehicle.
Charging Information
• Normal Charge :
The plug-in hybrid vehicle is charged by plugging into a normal charger installed
in your home or a public charging station...
You may select when the charging connector can be locked and unlocked in the
charging inlet.
Press the button to change between
AUTO mode and LOCK mode...
Other information:
Inspection1.Check the temperature sensor resistance. [Hybrid drive motor] Measuring equipment : Multimeter Category Inspection area Inspection criteria Remarks Resistance(Temperature sensor)Pin 4 - 88kΩ (30°C / 86°F) - 20kΩ (10°C / 50°F)10 - 30°C / 50 - 86°F [Hybrid starter generator (HSG)] Measuring equipment : Multimeter Category Inspection area Inspection criteria Remarks Resistance(Temperature sensor)Pin 4 - 9126...
Removal1.Loosen the wheel nuts slightly.Raise the vehicle, and make sure it is securely supported.2.Remove the rear wheel and tire (A) from the rear hub. Tightening torque : 107.9 - 127.5 N.m (11.0 - 13.0 kgf.m, 79.6 - 94.0 lb-ft)
•
Be careful not to damage the hub bolts when removing the rear wheel and tire (A)...
Categories
Adjusting the side mirrors:
1. Press either the L (driver's side) or R (passenger's side) button (1) to select
the side view mirror you would like to adjust.
read more