Hyundai Ioniq (AE): Hybrid System Overview
- HEV (Hybrid Electric Vehicle) System
- PHEV (Plug-in Electric Vehicle) System
- Charging the Plug-in Hybrid Vehicle
- Charging Status
- Charging Connector AUTO / LOCK Mode
- Scheduled Charging
- Charging Precautions
- Normal Charge
- Trickle Charge
- Driving the Hybrid/Plug-in Hybrid Vehicle
- Starting the Vehicle
- Special Features
- Hybrid System Gauge
- Plug-in Hybrid Mode (Plug-in hybrid vehicle)
- AVN Screen (Plug-in hybrid vehicle)
- Aux. Battery Saver+ (Plug-in hybrid vehicle)
- Warning and Indicator Lights
- LCD Display Messages
- Energy flow
- Safety Precautions for Hybrid System
The refrigerant label provides information such as refrigerant type and amount. The label is located on the underside of the hood.
Hybrid Vehicle The HYUNDAI Hybrid Electric Vehicle (HEV) uses both the gasoline engine and the electric motor for power. The electric motor is run by a high-voltage HEV battery.
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Heater Core. Repair procedures
Replacement1.Disconnect the negative (-) battery terminal. 2.Remove the heater and blower assembly.(Refer to Heater - "Heater Unit") 3.Loosen the mounting screws and remove the driver's temperature control actuator (A).4.Remove the heater core cover (A) after loosening the mounting screws.
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: emperature Control Actuator. Description and operation
DescriptionThe temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. The signal from the control unit adjusts the position of the temperature door by operating the temperature switch. Then the temperature will be regulated by the hot/cold air ratio decided by the position of the temper
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Body (Interior and Exterior)
- BMS ECU. Schematic diagrams
- Transmission Gear Oil. Repair procedures
- New on site
- Most important about car
