Hyundai Ioniq (AE): Parking Distance Warning (PDW) / Components and components location

Component Location

1. BCM (Body Control Module)
2. Ultrasonic sensor

   
•
Parking Distance Warning control unit function is built in BCM (Body Control Module).

    Specification Item Specification Ultrasonic sensorVoltage ratingDC 12VDetecting range30 - 120cmOperation voltageDC 9 - 16VOperation currentMAX 350mAOperation temperature-30°C to +75°C (22°F to +167°F)Operation frequency48 ± 5KHzNumber of sensors8EA

    System OverviewParking Distance Warning (PDW) is an electronic driving aid that warns the driver to be cautious while parking or driving at low speed.

    Other information:

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Intake Actuator. Repair procedures

    Inspection1.Turn the ignition switch OFF.2.Disconnect the intake actuator connector.3.Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4.Verify that the intake actuator operates to the recirculation position when connected in reverse.

    Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Warning Indicator. Repair procedures

    RemovalWarning Indicator1.Disconnect the negative (-) battery terminal.2.Remove the mirror (A).InstallationWarning Indicator1.Install the outside mirror.2.Connect the negative (-) battery terminal.Inspection1.Apply battery voltage to each terminal as shown in the table and verify that the mirror operates properly.

    Categories

     
    Copyright © 2026 www.hioniqae.com - 0.0133