Hyundai Ioniq (AE): Heated Steering wheel / Description and operation
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual / Steering System / Steering wheel / Heated Steering wheel / Description and operation
| Description |
For the convenience of drivers during the winter, exothermic paint is applied to the surface of the steering wheel to generate heat when it is gripped.
Heated control unit (Body control module (BCM))
Heated pad :
Components locationHeated steering wheel control module (Body control moduel (BCM))1. Body contorl module Heated steering wheel switch1. Heated steering switch
Specifications Item Specification Voltage13.5 VHeated pad resistance1.8 Ω ± 0.2 Ω NTC resistance10.
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Duct Sensor. Components and components location
C
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Intake Actuator. Repair procedures
Inspection1.Turn the ignition switch OFF.2.Disconnect the intake actuator connector.3.Verify that the intake actuator operates to the fresh position when connecting 12V to terminal 3 and grounding terminal 4.Verify that the intake actuator operates to the recirculation position when connected in reverse.
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- Jump Starting
- Hybrid Vehicle Engine Compartment
- Transmission Gear Oil. Repair procedures
- New on site
- Most important about car
Copyright © 2026 www.hioniqae.com - 0.0147