Hyundai Ioniq: Seat Belt Pretensioner. Seat Belt Pretensioner (BPT) / Description and operation

Hyundai Ioniq (AE) 2017-2025 Service Manual / Restraint / Seat Belt Pretensioner. Seat Belt Pretensioner (BPT) / Description and operation

Description

The Seat Belt Pretensioners (BPT) are installed inside Center Pillar (LH & RH). When a vehicle crashes with a certain degree of frontal impact, the pretensioner seat belt helps to reduce the severity of injury to the front seat occupants by retracting the seat belt webbing. This prevents the front occupants from thrusting forward and hitting the steering wheel or the instrument panel when the vehicle crashes.

(Seat belt pretensioner may be activated in side impact collisions if the vehicle has side airbag or curtain airbag.)

•	Never attempt to measure the circuit resistance of the Seat Belt Pretensioner (BPT) even if you are using the specified tester. If the circuit resistance is measured with a tester, the pretensioner will be ignited accidentally. This will result in serious personal injury.

Seat Belt Pretensioner. Seat Belt Pretensioner (BPT)

Components and components location

C..

Other information:

Hyundai Ioniq (AE) 2017-2025 Owner's Manual: Low Tire Pressure Warning Light

This warning light illuminates: When you place Engine Start/Stop button to the ON position. - It illuminates for approximately 3 seconds and then goes off. When one or more of your tires are significantly underinflated. This warning light remains ON after blinking for approximately 60 seconds, or repeatedly blinks ON and OFF in 3 second intervals: • When there is a malfunction with the TPMS...

Hyundai Ioniq (AE) 2017-2025 Owner's Manual: Owner Maintenance

WARNING Performing maintenance work on a vehicle can be dangerous. If you lack sufficient knowledge and experience or the proper tools and equipment to do the work, have it done by an authorized HYUNDAI dealer. ALWAYS follow these precautions for performing maintenance work: Park your vehicle on level ground, move the shift lever into the P (Park), apply the parking brake, and place the Engine Start/Stop button in the OFF position...