Hyundai Ioniq (AE): Engine Control System / Engine Coolant Temperature Sensor (ECTS). Specifications
| Specification |
|
Temperature
|
Resistance (kΩ)
| |
|
°C
|
°F
| |
| -40 | -40 | 48.14 |
| -20 | -4 | 14.13 - 16.83 |
| 0 | 32 | 5.79 |
| 20 | 68 | 2.31 - 2.59 |
| 40 | 104 | 1.15 |
| 60 | 140 | 0.59 |
| 80 | 176 | 0.32 |
DescriptionEngine Coolant Temperature Sensor (ECTS) is located in the engine coolant passage of the cylinder head for detecting the engine coolant temperature.
Circuit Diagram[Water Temperature Control Assembly][EGR Cooler Tube]
Other information:
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Blower Unit. Repair procedures
Replacement When prying with a flat-tip screwdriver or use a prying trim tool, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.1.Disconnect the negative (-) battery terminal.2.Recover the refrigerant with a recovery / recycling / charging station.
Hyundai Ioniq (AE) 2017-2022 Service & Repair Manual: Rear Corner Radar Unit. Repair procedures
Removal1.Disconnect the negative (-) battery terminal.2.Remove the rear bumper.(Refer to Body - "Rear Bumper")3.Remove the rear corner radar unit (A) after loosening the mounting nuts. • Take care not to separate the bracket from rear bumper when removing the rear corner radar sensor.
Categories
- Manuals Home
- Hyundai Ioniq Owners Manual
- Hyundai Ioniq Service Manual
- DCT(Dual Clutch Transmission) System
- Repair procedures
- Engine Control/Fuel System
- New on site
- Most important about car
