Hyundai Ioniq: Front Seat Belt / Height Adjust. Components and components location

Replacement
•
When installing the belt, make sure not to damage the pretensioner.1.Remove the center pillar upper trim...
Replacement1.Remove the front seat belt upper anchor.(Refer to Front Seat Belt - "Front Seat Belt Pretensioner")2.After loosening the mounting bolts, remove the height adjust (A)...
Other information:
DescriptionHeated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed both upstream and downstream of the Manifold Catalytic Converter. The sensor output voltage varies in accordance with the air/fuel ratio.The sensor must be hot in order to operate normally...
Removal1.Turn ignition switch OFF and disconnect the battery negative (-) terminal.2.Remove the engine room under cover.(Refer to Engine Mechanical System - "Engine Room Under Cover")3.Disconnect the clutch actuator connector (A).4.Remove the fork cover (A)...
Categories

The Driver Position Memory System is provided to store and recall the following
memory settings with a simple button operation.
- Driver's seat position
- Side view mirror position
- Instrument panel illumination intensity
read more