Hyundai Ioniq: Hood / Hood Insulator Pad. Repair procedures
1. | Using a clip remover, remove the clips and then the hood insulator pad (A). •
| Be careful not to scratch the hood panel. |
|

|
2. | To install, reverse the removal procedure. •
| Replace any damaged clips (or pin-type retainers). |
|
|
Replacement1.Remove the hood weatherstrip (A).
•
Be careful not to scratch the hood weatherstrip. 2.To install, reverse the removal procedure...
Other information:
Removal1.Turn the ignition seitch OFF and disconnect the battery negative (-) cable. 2.Open the fuel filler door and then remove the filler-neck installation screw (A).3.Lift the vehicle. 4.Remove the rear-LH wheel, tire, and the inner wheel house. 5...
Removal1.Disconnect the brake fluid level switch connector, and remove the reservoir cap.2.Remove the brake fluid from the master cylinder reservoir with a syringe.
•
Do not spill brake fluid on the vehicle, it may damage the paint; if brake fluid does contact the paint, wash it off immediately with water...
Categories

1. Door lock/unlock button
2. Driver position memory system
3. Side view mirror control switch
4. Central door lock switch
read more